2020 Rhino Equipment Wheel Excavators REX74CW
- Year 2020
- Make Rhino Equipment
- Model Wheel Excavators
- Engine Model: A498BPG
2020 Rhino Equipment Wheel Excavators REX74CW
The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.
Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.
Features may include:
- This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
- Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
- Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
- Reliable and durable Diesel engine, more efficient with low maintenance costs.
Engine
Engine Manufacturer
Rhino®
Engine
Model: A498BPG
Emissions
Tier 2
Cylinder Liners
4
Displacement
3.2 L (195 cu. In)
Engine Power
Net Power 45 kW (60 Hp) @2,500 rpm
Aspiration
Naturally Aspirated
Bore
Boom(1): 110 mm (4.3 in) | Arm(1): 90 mm (3.5 in) | Bucket(1): 80 mm (3.1 in)
Stroke
Boom(1): 850 mm (33.5 in) | Arm(1): 975 mm (38.4 in) | Bucket(1): 695 mm (27.4 in)
Fuel System
Fuel System
Direct Injection
Drivetrain
Drivetrain
Crawler Mode: Dual speed mode for tracks on-dash one-button activation | Wheel Mode: Two-wheel-drive; Front tire steering; Full hydraulic control
Battery
Battery
Number: 2
Electric
Electrical
Voltage: 24 Volts
Alternator
Rating: 70 A
Operational
Operating Speed
Maximum Travel (Track mode) Low: 2.7 (1.7) | Maximum Travel (Track mode) High: 5.1 (3.2) | Maximum Travel (Track mode) Wheel Mode: 10 (6.2)
Operating Conditions
Arm Digging Force: 33 kN (7,419 lb) | Bucket Digging Force: 53 kN (11,847 lb)
Hydraulics
Hydraulic Pump
Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure
18 mpa (2,611 psi) | Power Boost: 29 mpa (4,206 psi)
Hydraulic Flow
Max. Flow: 48 L/min (13 gpm)
Hydraulic Type
Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons
Lights and Safety
Lighting
Lights: 3 Front lights, 1 Rear lights turn signals, brake lights
Dimensions
Dimensions
Boom(1) Rod Diameter: 60 mm (2.4 in) | Arm(1) Rod Diameter: 55 mm (2.2 in) | Bucket(1) Rod Diameter: 50 mm (2.0 in) | Max. Reach: 5,975 mm (19.6 ft) | Max. Reach at Ground Level: 5,780 mm (19.0 ft) | Tail Swing Radius: 1,788 mm (5.9 ft) | Swing Radius: 1,788 mm (5.9 ft) | Counterweight Clearance: 650 mm (2.1 ft) | Wheel Tread: 1,930 mm (6.3 ft)
Track Width
500 mm (19.7 in)
Length
Arm: 2,000 mm (6.6 ft) | Track on Ground: 2,950 mm (9.7 ft) | Undercarriage: 3,100 mm (10.2 ft)
Depth, Maximum
Digging: 2,990 mm (9.8 ft) | Digging Depth at 2,000 mm (6,6 ft) Flat Bottom: 2,890 mm (9.5 ft)
Height
Max. Cutting: 5,400 mm (17.7 ft) | Max. Dumping: 3,900 mm (12.8 ft) | Cab: 1,645 mm (5.4 ft)
Overall Length
Transport: 6,100 mm (20.0 ft)
Overall Height
With 2,000 mm (6.6ft) Arm: 2,905 mm (9.5 ft)
Width
Upperstructure: 1,995 mm (6.5 ft) | Gauge: 1,900 mm (6.2 ft)
Overall Width
With Triple Semi-Grouser 500 mm (20 in) Shoes: 2,085 mm (6.8 ft)
Capacities
Fuel Capacity
160(42)
Cooling System
12(3)
Oil capacity
Engine: 8(2)
Hydraulic Capacity
Tank: 160(42) | Swing Drive: 5(1)
Features
Final Drive Case (each): 70(18)
Cargo Capacity
Lift Over End at 15' Radius, Ground Level: 3,010 kg (6,636 lb) | Lift Over Side at 15' Radius, Ground Level: 1,925 kg (4,244 lb)
Features
Features
Carrier Rollers (each side): 1 | Track Rollers (each side): 5 | Shoes (each side) Triple Semi-Grousers: 40 | Undercarriage Adjustment: Hydraulic | Undercarriage Guides: Front Idler
Chain Type
Undercarriage: Sealed and lubricated