2020 Rhino Equipment Wheel Excavators REX75W

2020 Rhino Equipment Wheel Excavators REX75W

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Wheel Excavators
  • Engine Model: RE51360
2020 Rhino Equipment Wheel Excavators REX75W

2020 Rhino Equipment Wheel Excavators REX75W

2020 Rhino Equipment Wheel Excavators REX75W

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
  • Reliable and durable Diesel engine, more efficient with low maintenance costs.

Engine

Engine Manufacturer Rhino®
Engine Model: RE51360
Emissions Tier2
Cylinder Liners 4
Displacement 3.0 L (183 cu in)
Engine Power Net Power 51 kW (60 Hp) @ 2,000 rpm
Aspiration Naturally Aspirated
Bore Blade Cylinder(1): 80 mm (3.1 in) | Stabilizers(2): 85 mm (3.3 in) | Boom(2): 115 mm (4.5 in) | Arm(1): 95 mm (3.7 in) | Bucket(1): 85 mm (3.3 in)
Stroke Blade Cylinder(1): 350 mm (13.8 in) | Stabilizers(2): 650 mm (25.6 in) | Boom(2): 885 mm (34.8 in) | Arm(1): 900 mm (35.4 in) | Bucket(1): 730 mm (28.7 in)

Fuel System

Fuel System Direct Injection

Drivetrain

Drivetrain Dual speed mode for wheels on-dash one-button activation

Wheels & Tires

Tires, Front Specification 6 Tires, 14-17.5
Tires, Rear Specification 6 Tires, 14-17.5

Battery

Battery Number: 2

Electric

Electrical Voltage: 24V
Alternator Rating: 70A

Operational

Operating Speed Maximum Travel Low: 8(5) | Maximum Travel High: 30(19) | Swing Mechanism: 13 rpm
Operating Conditions Arm Digging Force: 45 kN (10,116 lb) | Bucket Digging Force: 60 kN (13,489 lb)

Hydraulics

Hydraulic Pump Open center, load sensing; two constant displacement gear pumps
Maximum Pressure 18 Mpa (2,611 psi)
Hydraulic Flow Max. Flow: 150 L/min (40 gpm)
Hydraulic Type Control: 2 Pilot levers, low-effort hydraulic controls with horn

Lights and Safety

Lighting Lights: Working lights, turn signals, brake lights

Dimensions

Dimensions Blade Cylinder(1) Rod Diameter: 55 mm (2.2 in) | Stabilizers(2) Rod Diameter: 55 mm (2.2 in) | Boom(2) Rod Diameter: 65 mm (2.6 in) | Arm(1) Rod Diameter: 60 mm (2.4 in) | Bucket(1) Rod Diameter: 55 mm (2.2 in) | Max. Reach: 5,800 mm (19.0 in) | Max. Reach at Ground Level: 5,670 mm (18.6 in) | Max. Vertical Wall: 3,505 mm (11.5 in) | Wheel Tread: 1,650 mm (5.4 ft)
Length Arm: 2,100 mm (6.9 ft)
Depth, Maximum Digging: 3,450 mm (11.3 ft) | Digging Depth at 1,890 mm (6 ft) Flat Bottom: 3,345 mm (11.0 ft)
Height Max. Cutting: 6,200 mm (20.3 ft) | Max. Dumping: 3,000 mm (9.8 ft) | Cab: 1,650 mm (5.4 ft)
Overall Length Transport: 6,500 mm (21.3 ft)
Overall Height With 2,100 mm (6.9 ft) Arm: 3,000 mm (9.8 ft)
Ground Clearance 2WD: 315 mm (1.0 ft) | 4WD: 300 mm (1.0 ft)
Overall Width With 14-17.5 Tires: 2,200 mm (7.2 ft)
Wheelbase 2,265 mm (7.4 ft)

Capacities

Fuel Capacity 130(34)
Cooling System 17(4)
Oil capacity Engine: 21(6)
Hydraulic Capacity Tank: 100(26)
Features Swing Drive: 8(2)
Cargo Capacity Lifting Capacity at Ground Level, 15' Reach: 4,890 kg (10,781 lb)

Product Photography