2020 Rhino Equipment Wheel Loaders RWL235

2020 Rhino Equipment Wheel Loaders RWL235

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Wheel Loaders
  • Engine Cummins Model: M11
2020 Rhino Equipment Wheel Loaders RWL235

2020 Rhino Equipment Wheel Loaders RWL235

2020 Rhino Equipment Wheel Loaders RWL235

Rhino® Wheel Loaders are today’s solution to meet high performance requirments, have maximum uptime, and low cost operation. Designed to keep you competitive, these loaders let you finish the job faster and put more profit in your pocket.

The RWL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control with less spillage. RWL Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.

Rhino® wheel loaders saves you money by keeping operating costs to a minimum – getting more work done per unit of fuel used.

Features may include:

  • If you`ve got maximum productivity in mind, the RWL Series Loaders should be at the top of your list. But it`s not just their big torque reserves thet make them such impressive performers. Joystick control provide smooth, near-effortless control. Rhino® hydraulics sense the load and deliver the flow needed for smooth combined functions and fast work cycles.
  • Control panel provides access to critical machine info, brake and throttle pedals are conveniently positioned for maximum comfort to the operator.
  • Rhino® cylinders offer superior strength and dent resistance deliver longer component life and reduced risk of system contamination. Rhino® Cylinders and Rods are designed to allow for a variety of service / repair options.
  • High quality hose products mean fewer hose changes. Rhino® Equipment offers a broad line of high, medium and low-pressure hoses and couplings that are engineered and tested far beyond industry standards for top performance and long life.

Engine

Engine Manufacturer Cummins | Rhino®
Engine Cummins Model: M11
Emissions Tier2
Cylinder Liners 6
Displacement 11 L (671 cu. In)
Engine Power Net Power kW (Hp) @ Rated rpm: 216(290)@ 2,200 rpm
Engine Torque Net Peak Torque Nm (lb-ft) @ Rated rpm: 1,329(980)@ 1,500 rpm
Lubrication Full-flow spin-on filter
Aspiration Turbocharged, charge air cooled
Air Cleaner Under-hood, dual element dry type, restriction indicator on filter housing for service

Fuel System

Fuel System Direct Injection

Drivetrain

Final Drive Heavy duty inboard-mounted planetary
Transmission Type: Powershift | Torque Converter: Single-stage, Dual-phase, Quad-element torque | Operator Interface: Steering column lever for two gears forward and one in reverse | Shift Modes: Manual activation (Forward: 1st and 2nd; Reverse: 1st)
Differential Lock Helical bevel gear
Steering Type: Articulated frame, fully hydraulic | Articulation Angle: 35 degrees | Raise sec.: 6.1 | Dump sec.: 1.9 | Lower sec. : 3.8 | Total sec.: 11.8

Battery

Battery 2-12 volt: 120A

Electric

Electrical 24 Volts
Alternator 70 Amp

Brakes

Rear braking system Rear Axel Oscillation (with 26.5 R 25 20 tires): 24 degrees (12 degrees each direction)
Brake System Type Service: Pneumatically assisted, hydraulically actuaded, four wheels disk brake
Parking Brake Manually activated, drum mounted on front output shaft

Wheels & Tires

Tires, Front Specification 26.5 R 25 20 Ply: (Tread Width 2,350 mm (92.5 in) | Width Over Tires: 3,099 mm (122.0 in) )
Tires, Rear Specification 26.5 R 25 20 Ply: (Tread Width 2,350 mm (92.5 in) | Width Over Tires: 3,099 mm (122.0 in) )

Operational

Operating Speed Maximum Travel Speeds (with 23.5 R 25 tires) 1st Gear: 7 km/h (5 mph) | Maximum Travel Speeds (with 23.5 R 25 tires) 1st Gear: 12 km/h (8 mph) | Maximum Travel Speeds (with 23.5 R 25 tires) 2nd Gear: 26 km/h (16 mph)
Cycle Time Hydraulic: Z-Bar
Operating Conditions Breakout Force: 22,000 Kg (48,502 lb) | Max. Rollback at Ground Level: 50 degrees | Max. Rollback, Boom Fully Raised: 67 degrees | Max. Bucket Dump Angle, Fully Raised: 48 degrees

Hydraulics

Hydraulic Pump Pump (Loader and Steering): Gear Pump, variable displacement, closed-center
Hydraulic Flow Max. Rated Flow at 2,200 rpm L/min (gpm): 210 (55)
Maximum Pressure System Relief Pressure (Loader and Steering): 21 Mpa (3,046 psi)

Dimensions

Dimensions Reach, 45 degree Dump, 2,130 mm (7ft) Clearance: 1,960 mm (6.4 ft) | Loader Clearance Circle, Bucket Carry Position: 16,100 mm (52.8 ft)
Turning Radius Steering (measured to centerline of outside tire): 6,487 mm (21.3 ft)
Height Top of Cab and Canopy: 3,730 mm (12.2 ft) | Hood: 3,500 mm (11.5 ft) | Hinge Pin, Fully Raised: 4,460 mm (14.6 ft) | Dump Clearance, 45 degree Full Height: 3,220 mm (10.6 ft) | Reach, 45 degree Dump, Full Height: 1,275 mm (4.2 ft)
Ground Clearance 496 mm (1.6 ft)
Wheelbase 3,400 mm (11.2 ft)
Overall Length Bucket on Ground: 8,280 mm (27.2 ft)
Depth, Maximum Max. Digging Depth: 212 mm (0.7 ft)
Width Bucket: 3,266 mm (10.7 ft)

Capacities

Fuel Capacity Tank: 425 L (112 gal)
Cooling System 30 L (8 gal)
Oil capacity Engine: 32 L (8 gal)
Transmission Fluid Volume 38 L (10 gal)
Axle Capacity, Rear Axle Oil (Front and Rear, each): 20 L (5 gal)
Hydraulic Capacity Tank: 300 L (79 gal)
Features Brake System (Front and Rear Booster Pump, each): 2.0 L (0.5 gal)
Heaped Capacity 4.2 m3 (5.5 cu. Yd)
Struck Level 3.5 m3 (4.6 cu. Yd)
Cargo Capacity Tipping Load, Straight: 17,280 Kg (38,096 lb) | Tipping Load, 35 degree Full Turn: 15,551 Kg (34,284 lb)

Weights

Weight Bucket: 2,065 Kg (4,553 lb)
Weight, In Running Order Operating: 23,500 Kg (51,809 lb)

Features

Features Fan Drive: Belt driven | Loader Controls: Dual-multiway valve, joystick control

Product Photography